US City and Township Police Badges

1915-1916 City Marshal Appointment Document

Early 20th Century World War I 1915-1916 City Marshal Appointment Document.

This hand written document is signed by the Mayor of Watseka, Iroquois County, Illinois appointing Thomas A. Harper as a City Marshal for a period of one year: 1 May 1915-1 May 1916. It is signed by the Mayor Claude N. Saum (a noted lawyer of the time) and recorded by the City Clerk, Arthur H. Gehl.

It measures 8-1/4 by 14 inches high.

The condition is generally very good, with some wear and tear at the margins and corners from age, as shown. It should be easily concealable by proper matting and framing.

1916-1917 City Marshal Appointment Document

Early 20th Century World War I 1916-1917 City Marshal Appointment Document.

This hand written document has some nice calligraphy.  It is signed by the Mayor of Watseka, Iroquois County, Illinois appointing Thomas A. Harper as a City Marshal for a period of one year: 1 May 1916-1 May 1917. It is signed by the Mayor Claude N. Saum (a noted lawyer of the time) and recorded by the City Clerk, Arthur H. Gehl.

It measures 8-1/4 by 14 inches high.

The condition is generally very good, with some wear and tear at the margins and corners from age, as shown. It should be easily concealable by proper matting and framing.

Early 20th Century Die Struck and raised Hallmarked DC Metropolitan Special Police Badge.

Badge is numbered . It measures 2-1/4 by 2-1/2 inches high.

The condition is very good to near excellent, with some wear and tarnish from age, as shown.

Early 20th Century Allentown Pennsylvania Custom Die Fire Police Department Numbered Badge

This very heavy gold plated custom die badge featuring the city coat of arms. It has no maker marks. It is slightly vaulted and has a blue enameled number "22" indicated.

Here is a view of the back. It measures 1-3/4 inches wide and high.

The condition is very good to near excellent, with some wear and tarnish from age, as shown.

Early 20th Century Argentine Kansas Police Department Numbered Badge

This badge features a cut-out star design. It has no maker marks. It is slightly vaulted and has a black enameled stamped lettering and the number "10" indicated.  It is not numbered.

Here is a view of the back. It measures 2 inches in diameter.

The condition is very good to near excellent, with some wear and tarnish from age, as shown.

Mid 20th Century Town of Babylon Pennsylvania Junior Police Department Captain Badge

This heavy nickel badge with no maker marks. It is slightly vaulted and has a black enameled letter banner with the rank indicated.  It is not numbered.

Here is a view of the back. It measures 1-3/4 by 2-3/8 inches high. It has an applied pin assembly with a 1936 patent number.

The condition is very good to near excellent, with some tarnish from age, as shown.

Early 20th Century Baltimore Police Department Lieutenant Badge

This heavy gilded custom die badge with no maker marks. It is slightly vaulted and has a black enameled letter banner with the rank indicated.  It is not numbered.

Here is a view of the back. It measures 2-1/4 by 3-1/8 inches high.

The condition is very good to near excellent, with some tarnish from age, as shown.

Early 20th Century Baltimore Park Police Department numbered Badge

This heavy nickel plated badge with no maker marks. It is slightly vaulted and has a black enameled lettered banners with the number "3023" separately applied.

Here is a view of the back. It measures 2-1/4 by 2-1/2 inches high. It has a simple hinged pin and hook closure

The condition is very good to near excellent, with some tarnish from age, as shown.

Early First Pattern Bayonne New Jersey 8 Point Star Badge

This is a very early-20th Century era badge with vaulted two-piece construction featuring a separately applied State coat of arms seal. The silver plate shows some wear from carry.  There are separately stamped numbers "101".

This is a view of the back.  There are no maker marks.

It measures 2-1/2 inches in diameter.

The fastener is a simple hinged pin and hook closure.

The condition is near excellent, with minor tarnish and some wear from age, as shown.

Early 20th Century Massachusetts Metropolitan Police Department Sunburst Columns Pattern Badge

This heavy custom die badge with no maker marks. It is very slightly curved.  It is numbered 48 stamped on the back of the badge.

Here is a view of the back. It measures 2 by 2-7/8 inches high.

The condition is near very good, with wear to the plate (mostly on the back), as shown.

Early 20th Century Massachusetts Metropolitan Police Department Sunburst Columns Pattern Badge

This heavy custom die badge with no maker marks. It is very slightly curved.  It is numbered 308 stamped on the back of the badge.

Here is a view of the back. It measures 2 by 2-7/8 inches high.

The condition is near excellent, as shown.

Early 20th Century Massachusetts Metropolitan Police Department Sunburst Columns Pattern Badge

This heavy custom die badge with no maker marks. It is very slightly curved.  It is unissued and not numbered on the back of the badge.

Here is a view of the back. It measures 2 by 2-7/8 inches high.

The condition is near mint, as shown.

Early 20th Century Boston Special Police Department Sunburst Pattern Numbered 2838 Badge

This heavy custom die badge with no maker marks. It is flat.  It is numbered with a deep machine stamped 2838 on an applied disk on the back. The lettering is RAISED on the face of the badge.

Here is a view of the back. It measures 2-1/4 by 3 inches high.

The condition is near excellent, as shown.

Early 20th Century Boston Police Department Sunburst Pattern Badge

This is a heavy plated badge with no maker marks. It is slightly vaulted and has a black enameled letters and numbers.  It is numbered 6192 on the face of the badge. It has a simple spring pin closure.

Here is a view of the back. It measures 2-1/8 by 2-3/4 inches high.

The condition is near very good, with deep tarnish, as shown.

Bridgeport Connecticut Pie Plate Badge

This is a very early-20th Century era badge with vaulted one-piece construction featuring a separately applied State coat of arms seal. The silver plate shows some wear from carry.  There are separately applied numbers "273".

This is a view of the back.  There are no maker marks.

It measures 2-5/8 by 3-3/8 inches.

The fastener is a simple hinged pin and hook closure.

The condition is near very good, with tarnish and some wear from age, as shown.

Pre-World War I Turn of the 20th Century Bridgeport Connecticut Special Police Numbered Department Badge

This heavy nickel custom die badge with no maker marks. It is slightly vaulted and has separately applied numbers 863.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 2-1/4 by 2-1/2 inches high.

The condition is very good to near excellent, with some tarnish from age, as shown.

Pre-World War I Turn of the 20th Century Bridgeport Connecticut Custom Die Police Numbered Cap Badge

This heavy nickel custom die badge with no maker marks. It is slightly vaulted and has separately applied numbers 517.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 2-1/8 by 2-7/8 inches high. It has a screw post and nut attachment.

The condition is near excellent, with some tarnish from age, as shown.

Post-World War I 20th Century Bridgeport Connecticut  Police Numbered Cap and Breast Badge with Patch Lot

This heavy plated badge set with no maker marks. Both are slightly vaulted and has separately applied numbers 517.

This is the patch front and rear. It measures 5-1/4 by 4-1/2 inches.

This is a newer issue than the badge above, dating to the mid 20th century and assigned to the same career policeman.

Here is a view of the back of the badges. The breast badge measures 2-1/4 by 2-1/2 inches high. It has a hinged pin and simple hook closure. The cap badge has a screw post attachment.

The condition is near excellent, with some tarnish from age, as shown.

Pre-World War I Turn of the 20th Century Buffalo New York Special Police Numbered Department Badge

This heavy nickel custom die badge with no maker marks. It is slightly vaulted and has separately applied numbers 375.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 2-3/8 by 2-1/2 inches high.

The condition is very good to near excellent, with some tarnish from age, as shown.

Pre-World War I Turn of the 20th Century Buffalo New York Police Reserve Numbered Department Badge

This heavy nickel badge with no maker marks. It is slightly vaulted and has separately applied numbers 1117.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 2-3/8 by 3-1/4 inches high. It has a hinged pin and simple hook closure.

The condition is near excellent, with minor tarnish from age, as shown.

This is a mid-20th Century Buffalo New York Police Named Department Badge

This is a very heavy gold plated custom die badge with no maker marks. It has three stars in lieu of a number and the name WALTER CHOJNACKI on the lower banner.  The Chojnacki family has a long history of service to the Buffalo City PD.

This is a old badge, dating to the early to mid 20th century.

Here is a view of the back. It measures 2-3/8 by 3-1/8 inches high. It has a hinged pin and simple hook closure.

The condition is near excellent, as shown.

This is a Butte (Montana) Police Badge

This is a very heavy copper star badge with DETECTIVE PUBLISHING CO. CHICAGO maker marks. It has the number 46, the Butte Police banner and State seal, all separately applied.

This is a old badge with a spring pin style attachment.

Here is a view of the back. It measures 3-1/2 inches in diameter.

The condition is near very good with deep tarnish, as shown.

Pre-World War I Turn of the 20th Century Camden New Jersey Special Officer Numbered 1216 Badge

This heavy nickel custom die-struck badge with no maker marks. It is slightly vaulted and has separately applied central disk with stamped number No. 1216.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 2-1/8 inches in diameter.

The condition is very good to near excellent, with some moderate tarnish from age, as shown.

Chicago Detective Sergeant Numbered Badge

Roaring 20s Gangster Era Chicago Illinois Police Detective Sergeant Pie Plate Star Numbered 203 Badge

This heavy nickel ball end six-point vaulted star three piece badge with no maker marks. It has two separately applied central disks, one indicating the rank, the other with the city coat of arms with stamped number 203.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 2-3/4 inches in diameter.

The condition is very good to near excellent, with some minor tarnish from age, as shown.

Cleveland (Ohio) Police Spoon Buckle Tab

1920s Gangster Era Cleveland Ohio Police Spoon Buckle Tab

This heavy nickel plated brass partial buckle with no maker marks. This would fit a standard size 1-3/8 inch internal diameter wreath buckle end.

This is a old tab, dating to the early 20th century.

Here is a view of the back. It fits a 1-3/4 inch belt. It is 2-1/4 inches long overall.

The condition is very good to near excellent, with some minor tarnish from age, as shown.

Pre-World War I Turn of the 20th Century Des Moines Iowa Civil Service Detective Numbered Badge

This heavy nickel die-struck badge with no maker marks. It is slightly vaulted and has separately applied COPPER numbers 40.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 1-1/2 by 1-3/4 inches high.

The condition is very good to near excellent, with some tarnish from age, as shown.

Pre-World War I Turn of the 20th Century Detroit Police Numbered 487 Badge

This heavy nickel die-struck badge with a raised script letters BLACKINTON maker marks. It is slightly vaulted and has separately applied COPPER numbers 487.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 2-3/8 by 2-3/4 inches high.

The condition is very good to near excellent, with some tarnish from age, as shown.

Pre-World War I Turn of the 20th Century Detroit Special Police Cut Out Star Numbered 467 Badge

This heavy nickel die-struck badge with black enamel letters and a SUPERIOR SEAL & STAMP CO. DETROIT, MICH. maker mark. It is slightly vaulted and has separately applied spring pin closure.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 2-1/4 by 2-3/4 inches high.

The condition is very good to near excellent, with some wear from age, as shown.

Indianapolis Indiana Auxiliary Police Badge

World War I era early 20th Century Indianapolis Auxiliary Police Shield Numbered 102 Badge

This heavy nickel die-struck badge with separately applied central coat of arms disk and no apparent maker mark. It is flat and has simple spring pin closure.

This is a old badge, dating to the early 20th century. It is numbered 102 in the lozenge at the bottom.

Here is a view of the back. It measures 1-1/2 by 2-1/2  inches high.

The condition is generally very good, with some wear from age, as shown.

Pre-World War I Turn of the 20th Century Marshall Kansas City Five Point Star Marshall's Badge.

This heavy nickel die-struck badge with black enamel letters and it is marked Pettibone Co. Cincinnati.   This is a old badge.    It is slightly vaulted.

Here is a view of the back. It measures 3 inches point to point.

The condition is very good to near excellent, with some wear from age, as shown.

Pre-World War I Turn of the 20th Century Jackson Missouri Special Police 6 pointed Star Badge

This heavy nickel die-struck badge with black enamel letters and no apparent maker mark. It is slightly vaulted and has simple spring pin closure.

This is a old badge.

Here is a view of the back. It measures 3 inches point to point.

The condition is very good to near excellent, with some wear from age, as shown.

Early Gilt Colpper Shield KCMO Police Shield Badge

This is a  2-1/2 x 2 Inch 1938 Dated OBSOLETE Kansas City Missouri Private Police Badge. 

The central shield is separately applied and there is blue lettering and has the low number "370". This is an overall view of the back of the badge. It has a simple pad applied hook catch.

Private police were employed as stockyard and strike breakers. They were not a law enforcement agency.

It has a BEST STAMP Co.K. maker mark.

The condition is near excellent throughout

Leroy Kansas Police Officer Shield Badge

This is a  1-1/2 x 2-1/2 Inch mid-20th Century OBSOLETE Leroy Kansas Police Officer Badge. 

The Kansas coat of arms central disk is separately applied. This is an overall view of the back of the badge.

There is a hinged round pin with safety rotor catch.

The condition is near excellent throughout

This is a  1 x 1-1/2 Inch 1930s Depression Era OBSOLETE Marion Pennsylvania Fire Police Badge. 

The central disk is separately applied and has the State of Pennsylvania coat of arms. This is an overall view of the back of the badge.

The pin is a separately applied safety rotor catch assembly with a 1936 patent number.

The condition is near excellent throughout

Middlebury Vermont Special Police Badge

This is a  1 x 1-1/2 Inch 1930s Depression Era OBSOLETE Middlebury Vermont Special Police Numbered Badge. 

The badge is numbered with a low number "9" on the central lozenge. This is an overall view of the back of the badge.

The pin is a separately applied safety rotor catch assembly with a 1936 patent number.

The condition is near excellent throughout

Pre-World War I Turn of the 20th Century Newark New Jersey Police Cut Out Numbered 320 Badge

This heavy nickel die-struck badge with separately applied numbers and no apparent maker mark. It is slightly vaulted and has hinged pin closure that is missing the simple hook catch.

This is a old badge, dating to the early 20th century.

Here is a view of the back. It measures 2-3/8 by 2-1/2 inches high.

The condition is very good to near excellent, with some wear from age, and a missing hook catch, as shown.

This is a very scarce 1-7/8 x 2 Inch OBSOLETE City of F Deputy Inspector blue enamel and gilt badge with belt clip.

This is an overall view of the back of the badge holder. It has an applied integral pin catch securing it to the holder.  No numbers or maker marks are apparent.

The condition is near excellent throughout

This is an early to mid-20th century 2-1/8 x 2-3/4 Inch OBSOLETE City of New York Detective blue enamel and gilt die cast badge.

This is a difficult to find intact badge.

This is an overall view of the back of the badge. It has the typical thin lug NYPD integral pin catch connectors for using a safety pin to attach it to the uniform tunic. It has a JOHNSON N.Y NATIONAL maker mark stamped in the center of the back, just below the shield.

The condition is very good to near excellent with some routine wear to the deep blue enamel, as evident in the images.

This is an early to mid-20th century 1-7/8 x 2 Inch OBSOLETE City of New York Detective blue enamel and gilt CUT badge.

This is a difficult to find badge.

This badge was cut when it was taken out of service and crudely reassembled for collecting purposes many years ago.  It has a partial separately applied numbers (2_04) remaining.

This is an overall view of the back of the badge. It has the typical NYPD integral pin catch connectors for using a safety pin to attach it to the uniform tunic.

The condition is near fair, evident in the images.

Norwalk Connecticut City Police Department Badge

This die struck shield badge has no maker mark. It was hand stamped to apply the letters to the banners, and there are separately applied numbers 114 on the front.

This is a very old badge, dating to the early 20th century. It has had the hook replaced at one point, long ago.

Here is a view of the back.

The condition is near good to very good, with some tarnish from age, as shown.

Pittsburgh Pennsylvania Bureau of Police IDed City Department Badge

This die struck custom die shield badge with castle surmount has no maker mark. It has glossy black enamel banners and gilt letters on the front.

This is an old badge, dating to the mid 20th century (about WWII). The gilt badge measures approximately 2 inches in diameter.

Here is a view of the back with the pin up to show the engraving: COURTESY OF SUPT. HARVEY J. SCOTT. Police Superintendent Harvey J. Scott, was the city’s police chief for 13 years (1940-1952). On August 11, 1952,  was fired by Safety Director George E. A. Fairley for misconduct.

The condition is near excellent, with some tarnish from age, as shown.

River Forest Chicago Special Police Badge

River Forest Chicago Illinois Special Police Copper Numbered "191" Badge

This is a Roaring Twenties era OLD silver plate with separately applied copper number 191 Obsolete six pointed ball-end star badge.  It is maker marked MEYER-WENTHE CHICAGO

It measures 2-1/2 inches in diameter and it is deeply dished.  It has a pad applied simple spring pin on the back.

The condition is near very good, with wear to the plating, as shown.

Rochester New York Special Police Sergeant Badge

Rochester Special Police Sergeant Two Tone Silver on Gilt Badge

This is an early 20th century silver central rank disk separately applied to an eagle surmount badge.  It has no maker marks.

It measures 1-1/2 by 2-3/8 inches high.  It has a hinged pin and drop-in style safety rotor catch on the back.

The condition is near very good, with wear to the gilt, as shown.

Sacramento Police Superintendent of Traffic Badge

Sacramento Police Superintendent of Traffic Badge

This is a Post World War One HUGE OLD Silver and Enamel Obsolete SEVEN Pointed Star Sacramento California Superintendent of Traffic POLICE Custom Die Badge

It measures 3-1/8 inches in diameter and it is very deeply vaulted.  It has a pad applied simple spring pin on the back.

The condition is near excellent.

Sterling Michigan Secret Service Police Badge

Sterling Michigan Secret Service Police Badge

This is a mid-20th Century era badge with a multipiece construction. The silver plate on the separately applied central disk shows some wear from carry.

This is a view of the back.  There are no maker marks.

It measures 2-1/4 x 2-1/2 inches.

The fastener is a safety pin closure.

The condition is near excellent, with tarnish and some wear from age, as shown.

Topeka Kansas Lieutenant Wallet Badge

This is a mid-20th Century Topeka Kansas Police Lieutenant Silver on Gilt badge with two-piece construction featuring the state coat of arms on a separately applied central disk.

The gilt shows some wear from carry.  There is no number.

This is a view of the back.  There are no maker marks, however, this is a BLACKINTON design.

It measures 1-7/8 x 3 inches.

The fastener is an applied hinged pin and safety rotor assembly with a 1930s patent number.

The condition is near excellent, as shown.

Topeka Kansas Detective Wallet Badge

This is a mid-20th Century Topeka Kansas Police Detective Numbered Wallet badge with two-piece construction featuring the state coat of arms on a separately applied central enamel disk.

The silver plate shows some wear from carry.  There is a stamped number "92".

This is a view of the back.  There are no maker marks, however, this is a BLACKINTON design.

It measures 1-1/2 x 2-1/4 inches.

The fastener is a simple wide wallet clip.

The condition is near excellent, as shown.

Topeka Kansas Police Sergeant Badge

This is a mid-20th Century Topeka Kansas Police Sergeant badge with two-piece construction featuring the state coat of arms on a separately applied central enamel disk.

The silver plate shows some wear from carry.  It is not numbered.

This is a view of the back.  There is a script BLACKINTON maker mark.

It measures 1-7/8 x 3 inches.

The fastener is a hinged pin with safety rotor closure.

The condition is near excellent, as shown.

Topeka Kansas Police Corporal Badge

This is a mid-20th Century Topeka Kansas Police Corporal badge with two-piece construction featuring the state coat of arms on a separately applied central enamel disk.

The silver plate shows some wear from carry.  It is not numbered.

This is a view of the back.  There are no maker marks, however, this is a BLACKINTON design.

It measures 1-7/8 x 3 inches.

The fastener is a hinged pin with safety rotor closure.

The condition is near excellent, as shown.

Totowa NJ Marshal Badge

This is an early 20th Century Boro of Totowa, New Jersey MARSHAL LOW numbered "34" badge with one-piece construction featuring the state coat of arms as part of the custom die.

The silver plate shows moderate wear from carry.  It is numbered "34".

This is a view of the back.  There are no maker marks apparent.

It measures 2-1/4 x 2-1/2 inches.

The fastener is a hinged pin, however the catch assembly is completely missing (it appears it was a simple hook catch).

The condition is near very good, with wear, as shown.

First Pattern Trenton City New Jersey Badge

This is a very early-20th Century era badge with vaulted one-piece construction featuring the City coat of arms, wreath and eagle. The silver plate shows some wear from carry.  There are separately applied numbers "73".

This is a view of the back.  There are no maker marks.

It measures 3 x 1-1/2 inches.

The fastener is a simple hinged pin and hook closure.

The condition is near very good, with tarnish and some wear from age, as shown.

Wallington NJ Marshal Badge

This is an early 20th Century Wallington, New Jersey MARSHAL very LOW numbered "2" badge with two-piece construction featuring the state coat of arms on a separately applied central disk.

The silver plate shows significant wear from carry.  It is numbered "2".

This is a view of the back.  There are no maker marks apparent.

It measures 1-3/4 x 2-1/2 inches.

The fastener is a hinged pin, however the catch assembly is completely missing (it appears it was a simple hook catch).

The condition is near good, with wear, as shown.